Fieldbus & Fc Port - Danfoss VLT FC 102 Programming Manual

Programming Guide | VLT® HVAC Drive FC 102
16-79 Analog Out X45/3 [mA]
Default value: 0
Setup: All setups
Data type: Int16
Shows the actual output value at terminal X45/3. The value shown reflects the selection in parameter 6-80 Terminal X45/3 Output.
16-8* Fieldbus & FC Port
6.18.6
16-80 Fieldbus CTW 1
Default value:
0
Setup: All setups
Data type:
V2
View the 2-byte control word (CTW) received from the bus-master. Interpretation of the CTW depends on the fieldbus option installed
and the CTW profile selected in parameter 8-10 Control Word Profile. For more information, refer to the relevant fieldbus manual.
16-82 Fieldbus REF 1
Default value: 0
Setup:
All setups
Data type: N2
View the 2-byte word sent with the control word form the bus-master to set the reference value. For more information, refer to the
relevant fieldbus manual.
16-84 Comm. Option STW
Default value: 0
Setup:
All setups
Data type: V2
Shows the status word of the extended fieldbus communication option. For more information, refer to the relevant fieldbus manual.
16-85 FC Port CTW 1
Default value: 0
Setup:
All setups
Data type: V2
View the 2-byte control word (CTW) received from the fieldbus master. Interpretation of the control word depends on the fieldbus option
installed and the control word profile selected in parameter 8-10 Control Word Profile.
16-86 FC Port REF 1
Default value: 0
Setup:
All setups
422 | © 2024.10
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Parameter Descriptions
Range, 0 - 30
-3
False
Range, 0 - 65535
0
False
Range, -200 - 200
0
False
Range, 0 - 65535
0
False
Range, 0 - 65535
0
False
Range, -200 - 200
0
AU430028034214en-001901 / 130R0310