Danfoss VLT FC 102 Programming Manual page 441

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[130] lb/s
[131] lb/min
[132] lb/h
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171]
lb/in
[172] in WG
[173] ft WG
[174] in HG
[180] hp
20-03 Feedback 2 Source
Default value: [0] No function
Setup: All setups
Data type: Uint8
If feedback is not used, set its source to [0] No function. Parameter 20-20 Feedback Function determines how the PID controller
uses the 3 possible feedback.
Up to 3 different feedback signals can be used to provide the feedback signal for the PID controller of the drive. This parameter defines
which input is used as the source of the 2nd feedback signal. Analog input X30/11 and analog input X30/12 refer to inputs on VLT®
General Purpose I/O MCB 101.
Option Name
[0]* No function
[1] Analog input 53
[2] Analog input 54
[3] Pulse input 29
[4] Pulse input 33
[7] Analog input X30/11
[8] Analog input X30/12
© 2024.10
2
Description
Parameter type:
Conversion index:
Change during operation:
NOTICE
Description
Use this selection if feedback is not used.
Parameter Descriptions
Option
–
True
AU430028034214en-001901 / 130R0310 | 441