Danfoss VLT FC 102 Programming Manual page 340

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[62] Counter A (up)
[63] Counter A (down)
[64] Counter B (up)
[65] Counter B (down)
[70] Start timer 3
[71] Start timer 4
[72] Start timer 5
[73] Start timer 6
[74] Start timer 7
[75] Start timer 8
[76] Start timer 9
[80] Sleep mode
[90] Set ECB bypass mode
[91] Set ECB drive mode
[100] Reset alarms
13-55 SL Controller 3 Event
Default value: –
Setup: 2 setups
Data type: Uint8
Select the boolean (true or false) input for the selected logic rule. See parameter 13-02 Stop Event for more information.
Option Name
[0] False
[1] True
[2] Running
[3] In range
[4] On reference
340 | © 2024.10
Description
The motor runs at a reference which exceeds the value in
parameter 4-55 Warning Reference High.
Starts timer 3, see parameter 13-20 SL Controller Timer for
further description.
Starts timer 4, see parameter 13-20 SL Controller Timer for
further description.
Starts timer 5, see parameter 13-20 SL Controller Timer for
further description.
Starts timer 6, see parameter 13-20 SL Controller Timer for
further description.
Starts timer 7, see parameter 13-20 SL Controller Timer for
further description.
Starts timer 8, see parameter 13-20 SL Controller Timer for
further description.
Starts timer 9, see parameter 13-20 SL Controller Timer for
further description.
Starts the sleep mode.
Parameter type:
Conversion index:
Change during operation:
Description
Parameter Descriptions
Option, Array [20]
–
True
AU430028034214en-001901 / 130R0310