Danfoss VLT FC 102 Programming Manual page 293

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset trip
[42] Auto-reset trip
[43] OK key
[44] Reset key
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[76] Digital input X30/2
[77] Digital input X30/3
[78] Digital input X30/4
[90] ECB drive mode
© 2024.10
Description
Use the result of comparator 0.
Use the result of comparator 1.
Use the result of comparator 2.
Use the result of comparator 3.
Use the result of logic rule 0.
Use the result of logic rule 1.
Use the result of logic rule 2.
Use the result of logic rule 3.
Use the result of digital input 18.
Use the result of digital input 19.
Use the result of digital input 27.
Use the result of digital input 29.
Use the result of digital input 32.
Use the result of digital input 33.
A start command is issued. This is the default option.
A stop command (jog, stop, quick stop, coast) is issued - and not
from SLC itself.
A reset is issued.
An auto reset is performed.
[OK] is pressed. Only available on the graphical LCP.
[Reset] is pressed. Only available on the graphical LCP.
[◄] is pressed. Only available on the graphical LCP.
[►] is pressed. Only available on the graphical LCP.
[▲] is pressed. Only available on the graphical LCP.
[▼] is pressed. Only available on the graphical LCP.
Use the result of comparator 4.
Use the result of comparator 5.
Use the result of logic rule 4.
Use the result of logic rule 5.
Use the value of X30/2 (VLT® General Purpose I/O MCB 101).
Use the value of X30/3 (VLT® General Purpose I/O MCB 101).
Use the value of X30/4 (VLT® General Purpose I/O MCB 101).
AU430028034214en-001901 / 130R0310 |
Parameter Descriptions
293