Danfoss VLT FC 102 Programming Manual page 89

Programming Guide | VLT® HVAC Drive FC 102
1-20 Motor Power [kW]
Default value: Size related
Setup: All setups
Data type: Uint32
This parameter cannot be adjusted while the motor is running.
Enter the nominal motor power in kW according to the motor nameplate data. The default value corresponds to the nominal rated
output of the drive. This parameter is visible in the LCP if parameter 0-03 Regional Settings is set to [0] International.
1-21 Motor Power [HP]
Default value: Size related
Setup: All setups
Data type: Uint32
Enter the nominal motor power in hp according to the motor nameplate data. The default value corresponds to the nominal rated
output of the drive. This parameter is visible in the LCP if parameter 0-03 Regional Settings is set to [1] North America.
1-22 Motor Voltage
Default value:
Size related
Setup: All setups
Data type:
Uint16
© 2024.10
Parameter type:
Conversion index:
Change during operation:
NOTICE
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter Descriptions
Range, 0.09 - 3000.00 kW
1
False
Range, 0.09 - 3000.00 hp
-2
False
Range, 10 - 1000 V
0
False
AU430028034214en-001901 / 130R0310 | 89