Danfoss VLT FC 102 Programming Manual page 550

Programming Guide | VLT® HVAC Drive FC 102
Enter the quadratic coefficient of the missing motor detection function multiplied by 1000.
24-93 Missing Motor Coefficient 3
Default value: 0
Setup: All setups
Data type Int32
Enter the linear coefficient of the missing motor detection function multiplied by 1000.
24-94 Missing Motor Coefficient 4
Default value:
0
Setup: All setups
Data type:
Int32
Enter the constant coefficient of the missing motor detection function multiplied by 1000.
24-95 Locked Rotor Function
Default value: [0] Off
Setup: All setups
Data Type: Uint8
Select the action to be taken if the motor current is above the limit calculated as a function of the output frequency. The function is used
for detecting, for example, a locked rotor in multi-motor applications.
Option Name
[0]* Off
[1] Warning
24-96 Locked Rotor Coefficient 1
Default value:
0
Setup: All setups
Data type: Int32
Enter the cubic coefficient of the locked-rotor detection function multiplied by 1000.
24-97 Locked Rotor Coefficient 2
Default value:
0
Setup: All setups
Data type:
Int32
Enter the quadratic coefficient of the locked-rotor detection function multiplied by 1000.
550 | © 2024.10
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion Index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
Paramter type:
Conversion index:
Change during operation:
Parameter Descriptions
Range, -100 - 100
-4
True
Range, -500 - 500
-3
True
Option
–
True
Range, -10 - 10
-4
True
Range, -100 - 100
-4
True
AU430028034214en-001901 / 130R0310