Drive Identification - Danfoss VLT FC 102 Programming Manual

Programming Guide | VLT® HVAC Drive FC 102
View the time when the logged event occurred. Time is measured in s from start-up of the drive.
15-33 Alarm Log: Date and Time
Default value: Size related
Setup: All setups
Data type: TimeOfDay
Array parameter; Date & Time 0–9: This parameter shows when the logged event occurred.
15-38 Alarm Log: Speed
Default value:
0 RPM
Setup: All setups
Data type: Int32
View the actual motor speed value when the logged event occurred.

15-4* Drive Identification

6.17.11
The parameters in this parameter group contain read-only information about the hardware and software configuration of the drive.
15-40 FC Type
Default value: 0
Setup: All setups
Data type: VisStr[6]
View the drive type. The readout is identical to the drive power field of the type code definition, characters 1–6.
15-41 Power Section
Default value: 0
Setup:
All setups
Data type: VisStr[20]
View the power section. The readout is identical to the drive power field of the type code definition, characters 7–10.
15-42 Voltage
Default value: 0
Setup: All setups
Data type: VisStr[20]
View the voltage. The readout is identical to the drive power field of the type code definition, characters 11-12.
15-43 Software Version
Default value:
0
© 2024.10
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
AU430028034214en-001901 / 130R0310 |
Parameter Descriptions
Range, 0 - 0, Array [10]
0
False
Range, -30000 - 30000 RPM,
Array [10]
67
False
Range, 0 - 6
0
False
Range, 0 - 20
0
False
Range, 0 - 20
0
False
Range, 0 - 5
401