Safety; Safety Symbols; Safety Precautions - Danfoss VLT FC 102 Programming Manual

Programming Guide | VLT® HVAC Drive FC 102

Safety

2

Safety Symbols

2.1
The following symbols are used in Danfoss documentation.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
The guide also includes ISO warning symbols related to hot surfaces and burn hazard, high voltage and electrical shock, and referring to
the instructions.
ISO warning symbol for hot surfaces and burn hazard
ISO warning symbol for high voltage and electrical shock
ISO action symbol for referring to the instructions

Safety Precautions

2.2
LACK OF SAFETY AWARENESS
This guide provides important information on preventing injury and damage to the equipment or the system. Ignoring this
information can lead to death, serious injury, or severe damage to the equipment.
Make sure to fully understand the dangers and safety measures present in the application.
l
Before performing any electrical work on the drive, lock out and tag out all power sources to the drive.
l
HAZARDOUS VOLTAGE
AC drives contain hazardous voltage when connected to the AC mains or connected on the DC terminals.
Failure to perform installation, start-up, and maintenance by qualified personnel can result in death or serious
injury.
Only qualified personnel must perform installation, start-up, and maintenance.
l
© 2024.10
DANGER
WARNING
CAUTION
NOTICE
WARNING
WARNING
AU430028034214en-001901 / 130R0310 |
Safety
15