Ethernet/Ip - Danfoss VLT FC 102 Programming Manual

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[0]* Off
[1] Store all setups
[2] Store all setups
12-29 Store Always
Default value: [0] Off
Setup: 1 setup
Data type: Uint8
Activates a function that always stores received parameter data in the non-volatile memory (EEPROM).
Option Name
[0]* Off
[1] On

12-3* EtherNet/IP

6.14.4
12-30 Warning Parameter
Default value: 0
Setup: All setups
Data type Uint32
This parameter is read-only. It shows the EthetNet/IP-specific 16-bit status word.
Table 38: 16-Bit Status Word, EtherNet/IP
Bit
0
1
2
3
4
5
6
7
8
9
10
© 2024.10
Description
Parameter type:
Conversion index:
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
Description
Owned
Not used
Configured
Not used
Not used
Not used
Not used
Not used
Minor recoverable fault
Minor unrecoverable fault
Major recoverable fault
AU430028034214en-001901 / 130R0310 |
Parameter Descriptions
Option
–
True
Range, 0 - 2147483647
0
True
281