13-1* Comparators - Danfoss VLT FC 102 Programming Manual

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[229] Comparator 7
[230] Comparator 8
[231] Comparator 9
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[236] SL time-out 8
[237] SL time-out 9
[238] RS flipflop 8
[239] RS flipflop 9
[240] SL digital output A
[241] SL digital output B
[242] SL digital output C
[243] SL digital output D
[244] SL digital output E
[245] SL digital output F
13-03 Reset SLC
Default value: [0] Do not reset SLC
Setup: All setups
Data type:
Uint8
Option Name
[0]* Do not reset SLC
[1] Reset SLC

13-1* Comparators

6.15.3
Comparators are used for comparing continuous variables such as output frequency, output current, and analog input to fixed preset
values.
298 | © 2024.10
Description
Use the result of comparator 7 in the logic rule.
Use the result of comparator 8 in the logic rule.
Use the result of comparator 9 in the logic rule.
Use the result of logic rule 6 in the logic rule.
Use the result of logic rule 7 in the logic rule.
Use the result of logic rule 8 in the logic rule.
Use the result of logic rule 9 in the logic rule.
Smart logic controller time 8 is timed out.
Smart logic controller time 9 is timed out.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
Parameter type:
Conversion index:
Change during operation:
Description
Retain programmed settings in parameter group 13-** Smart
Logic
Reset all parameters in parameter group 13-** Smart Logic
Parameter Descriptions
Option
–
True
AU430028034214en-001901 / 130R0310