Introduction And Safety; Purpose Of The Operating Guide; Additional Resources; Safety Symbols - Danfoss iC7 Series Operating Manual

iC7 Series PROFINET
Operating Guide

1 Introduction and Safety

1.1 Purpose of the Operating Guide

This operating guide provides information about configuring the system, controlling the drive, accessing parameters, program-
ming, troubleshooting, and some typical application examples.
The operating guide is intended for use by qualified personnel, who are familiar with the iC7 drives, PROFINET technology, and the
PC or PLC that is used as a master in the system.
Read the instructions before configuring PROFINET, and follow the procedures in this guide.

1.2 Additional Resources

Additional resources are available to help understand the features, and safely install and operate the iC7 products:
• The safety guide, which provides important safety information related to installing iC7 drives.
• The installation guides, which cover the mechanical and electrical installation of drives, functional extension options, or other
extra components.
• The application guides, which provide instructions on setting up the drive for a specific end-use.
• Facts Worth Knowing about AC Drives, available for download on www.danfoss.com.
• Other supplemental publications, drawings, and guides are available at www.danfoss.com.
Latest versions of Danfoss product documentation are available for download at http://drives.danfoss.com/downloads/portal/.

1.3 Safety Symbols

The following symbols are used in this guide:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).

1.4 Safety Precautions

HIGH VOLTAGE
AC drives contain high voltage when connected to AC mains input, DC supply, or load sharing. Failure to perform installation,
start-up, and maintenance by qualified personnel can result in death or serious injury.
-
Only qualified personnel must perform installation, start-up, and maintenance.
Danfoss A/S © 2023.06
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
W A R N I N G
Introduction and Safety
AQ408626183394en-000101 / 136R0280 | 5