Danfoss VLT FC 102 Programming Manual page 175

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[202] Pump 2 running
[203] Pump 3 running
[234] PE power off
[236] Ext. CL 1 on ref
[237] Ext. CL 2 on ref
[238] Ext. CL 3 on ref
[240] RS flipflop 0
[241] RS flipflop 1
[242] RS flipflop 2
[243] RS flipflop 3
[244] RS flipflop 4
[245] RS flipflop 5
[246] RS flipflop 6
[247] RS flipflop 7
[249] Fire m. OPR unexpected
[250] Fire mode limits
[254] Testing fire mode
5-31 Terminal 29 Digital Output
Default value: –
Setup: All setups
Data type:
Uint8
The options for this parameter are the same as those listed for parameter 5-30 Terminal 27 Digital Output.
5-32 Term X30/6 Digi Out (MCB 101)
Default value: –
Setup:
All setups
Data type: Uint8
This parameter is active when option module VLT® General Purpose I/O MCB 101 is mounted in the drive. The options for this parameter
are the same as those listed for parameter 5-30 Terminal 27 Digital Output.
5-33 Term X30/7 Digi Out (MCB 101)
Default value: Size related
Setup: All setups
© 2024.10
Description
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
AU430028034214en-001901 / 130R0310 |
Parameter Descriptions
Option
–
True
Option
–
True
Option
–
175