Danfoss VLT FC 102 Programming Manual page 522

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[0]* Timed actions auto
[1] Timed actions disabled
[2] Constant on actions
[3] Constant off actions
23-09 Timed Actions Reactivation
Default value: [1] Enabled
Setup: 2 setups
Data type: Uint8
Option Name
[0] Disabled
[1]* Enabled
Timed Action
ON: RUN
OFF: STOP
Power
Power
Cycle
Cycle
P23-09:
P23-09:
Disabled
Disabled
Status
RUNNING
STOPPED
Figure 94: Example of Reactivation Test
522 | © 2024.10
P23-09: Power
Cycle
Disable
P23-09:
Enabled
Enable
Description
Enable timed actions.
Disable timed actions, normal operation according to control
commands.
Disable timed actions. Constant on actions are activated.
Disable timed actions. Constant off actions are activated.
Parameter type:
Conversion index:
Change during operation:
Description
After an update of:
• power cycling
• setting date
• time
• change of summertime
• change of Hand Auto mode
• change of Constant On and Off
• setup change where all activated ON actions are overridden to
OFF actions until passing the next time for an ON action. Any
OFF actions remain unchanged.
After an update of time/condition On and OFF actions are
immediately set to the actual time programming of ON and OFF
actions.
Parameter Descriptions
Option
–
True
AU430028034214en-001901 / 130R0310