Danfoss VLT FC 102 Programming Manual page 260

Programming Guide | VLT® HVAC Drive FC 102
10-11 Process Data Config Write
Default value: –
Setup: 2 setups
Data type: Uint16
Select the process write data for I/O Assembly Instances 101/151. Elements [2] and [3] of this array can be selected. Elements [0] and [1]
of the array are fixed.
Option Name
[0] None
[302] Minimum reference
[303] Maximum reference
[311] Jog speed [Hz]
[319] Jog speed [RPM]
[341] Ramp 1 ramp up time
[342] Ramp 1 ramp down time
[351] Ramp 2 ramp up time
[352] Ramp 2 ramp down time
[380] Jog ramp time
[381] Quick stop ramp time
[411] Motor speed low limit [RPM]
[412] Motor speed low limit [Hz]
[413] Motor speed high limit [RPM]
[414] Motor speed high limit [Hz]
[416] Torque limit motor mode
[417] Torque limit generator mode
[553] Term. 29 high ref./feedb. value
[558] Term. 33 high ref./feedb. value
[590] Digital & relay bus control
[593] Pulse out #27 bus control
[595] Pulse out #29 bus control
[597] Pulse out #30/6 bus control
[615] Terminal 53 high ref./feedb. value
[625] Terminal 54 high ref./feedb. value
[653] Terminal 42 output bus control
260 | © 2024.10
Parameter type:
Conversion index:
Change during operation:
Description
Parameter Descriptions
Option, Array [4]
–
True
AU430028034214en-001901 / 130R0310