Danfoss VLT FC 102 Programming Manual page 338

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[236] SL time-out 8
[237] SL time-out 9
[238] RS flipflop 8
[239] RS flipflop 9
[240] SL digital output A
[241] SL digital output B
[242] SL digital output C
[243] SL digital output D
[244] SL digital output E
[245] SL digital output F
13-54 SL Controller 2 Action
Default value: –
Data type: Uint8
Select the action corresponding to the SLC event. Actions are executed when the corresponding event (defined in parameter 13-53 SL
Controller 2 Event) is evaluated as true. The following actions are available:
Option Name
[0] Disabled
[1] No action
[2] Select set-up 1
[3] Select set-up 2
[4] Select set-up 3
[5] Select set-up 4
[10] Select preset ref 0
[11] Select preset ref 1
[12] Select preset ref 2
[13] Select preset ref 3
338 | © 2024.10
Description
Parameter type:
Change during operation:
Description
No action is taken if the SLC event is evaluated as true.
Changes the active setup to setup 1.
Changes the active setup to setup 2.
Changes the active setup to setup 3.
Changes the active setup to setup 4. If the setup is changed, it
merges with other setup commands coming from either the
digital inputs or via fieldbus.
Select preset reference 0.
Select preset reference 1.
Select preset reference 2.
Select preset reference 3.
Parameter Descriptions
Option, Array [20]
True
AU430028034214en-001901 / 130R0310