Danfoss VLT FC 102 Programming Manual page 356

Programming Guide | VLT® HVAC Drive FC 102
Option Name
[145] Pressure 2 low
[146] Pressure 3 low
[147] Pressure 4 low
[148] Pressure 1 high
[149] Pressure 2 high
[150] Pressure 3 high
[151[ Pressure 4 high
[228] Comparator 6
[229] Comparator 7
[230] Comparator 8
[231] Comparator 9
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[236] SL time-out 8
[237] SL time-out 9
[238] RS flipflop 8
[239] RS flipflop 9
13-91 Alert Action
Default value:
[0] Info
Setup: 2 setups
Data type:
Uint8
For safety reasons, this parameter cannot be changed when there is an active alarm.
Select the action that the drive performs when the event defined in parameter 13-90 Alert Trigger occurs.
Option Name
[0]* Info
[1] Warning
[2] Freeze output
[3] Freeze output & warn
356 | © 2024.10
Description
Parameter type:
Conversion index:
Change during operation:
NOTICE
Description
Parameter Descriptions
Option, Array [10]
–
True
AU430028034214en-001901 / 130R0310