Failed To Set Up Point-To-Point Calls; Failed To Send Register Requests - 3Com MSR 50 Series Configuration Manual

Failed to Set Up
Point-to-Point Calls
Failed to Send REGISTER
Requests
Symptom
The UA could not set up point-to-point calls.
Solution
Check that the IP address and the port number of the remote voice gateway are
correctly configured.
Symptom
The UA does not send REGISTER messages.
Solution
Do the following:
Perform the debugging voice sip command to see whether REGISTER
■
messages are being sent.
If no REGISTER messages are sent, enable the registration function with the
■
register-enable command.
Troubleshooting 2383