Displaying And Maintaining Sip Uas; Sip Ua Configuration Examples; Configuring Direct Calling For Sip Uas; Configuring Proxy Server Involved Calling For Sip Uas - 3Com MSR 50 Series Configuration Manual

Displaying and
Maintaining SIP UAs
SIP UA Configuration
Examples
Configuring Direct
Calling for SIP UAs
To do...
Enter system view
Enter voice view
Enter SIP client view
Configure the
User-Agent header field
in a SIP request
Configure the Server
header field in a SIP
response
To do...
Display all call statistics of the
SIP UA
Display the registration state
of the SIP UA
Clear all call statistics of the
SIP UA
This section provides two configuration examples:
"Configuring Direct Calling for SIP UAs" on page 2379
■
"Configuring Proxy Server Involved Calling for SIP UAs" on page 2380
■
Network requirements
Two routers can directly call each other as SIP UAs.
Network diagram
Figure 690 Network diagram for direct calling configuration
Router A
1111
Configuration procedure
n
Routing-related configurations are beyond the scope of this example. This
example assumes that Router A and Router B are reachable to each other.
1 Configure Router A
# Configure the Ethernet interface.
Use the command...
system-view
voice-setup
sip
sip-comp agent
product-name
product-version
sip-comp server
product-name
product-version
Use the command...
display voice sip
call-statistics
display voice sip
register-state
reset voice sip
Eth1/0
192 .168 .2 .1/24
Internet

Displaying and Maintaining SIP UAs

Remarks
-
-
-
Required
By default, the User-Agent header
field in a SIP request is not configured.
Required
By default, the Server header field in a
SIP response is not configured.
Remarks
Available in any view
Available in any view
Available in user view
Eth1/0
192 .168 .2.2/24
Router B
2222
2379