Protocols And Standards; Configuration Task List - 3Com MSR 50 Series Configuration Manual

Protocols and Standards

Configuration Task
List
Table 48 Description on fields in an MLDv2 report message
Field
Checksum
Number of Multicast Address
Records
Multicast Address Record(i)
MLD-related specifications are described in the following documents:
RFC 2710: Multicast Listener Discovery (MLD) for IPv6
■
RFC 3810: Multicast Listener Discovery Version 2 (MLDv2) for IPv6
■
Task
"Configuring Basic Functions of
MLD" on page 1224
"Adjusting MLD Performance" on
page 1226
n
Configurations performed in MLD view are globally effective, while
■
configurations performed in interface view are effective on the current
interface only.
If no configuration is performed in interface view, the global configurations
■
performed in MLD view will apply to that interface. Configurations performed
in interface view take precedence over those performed in MLD view.

Configuration Task List

Description
Standard IPv6 checksum
This field indicates how many IPv6 multicast address
records are present in this report message.
This field represents information of each IPv6 multicast
address the host listens to on the interface from which
the report message is sent, including record type, IPv6
multicast address, and IPv6 multicast source address on
the sender (i= 1, 2, ... m, where m represents the number
of IPv6 multicast address records).
"Enabling MLD" on page
1224
"Configuring the MLD
Version" on page 1224
"Configuring a Static
Member of an IPv6
Multicast Group" on page
1225
"Configuring an IPv6
Multicast Group Filter" on
page 1225
"Configuring MLD
Message Options" on
page 1226
"Configuring MLD Query
and Response Parameters"
on page 1227
"Configuring MLD Fast
Leave Processing" on page
1229
1223
Remarks
Required
Option
Option
Option
Option
Option
Option