Pim-Ssm Configuration Example - 3Com MSR 50 Series Configuration Manual

1202 C 71: PIM C
HAPTER ONFIGURATION
PIM-SSM Configuration
Example
RPF prime neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Pos5/2
Protocol: pim-sm, UpTime: 00:13:16, Expires: 00:03:22
Network requirements
Receivers receive VOD information through multicast. The receiver groups of
■
different organizations form stub networks, and one or more receiver hosts
exist in each stub network. The entire PIM domain operates in the SSM mode.
Host A and Host C are multicast receivers in two stub networks.
■
Router D connects to the network that comprises the multicast source (Source)
■
through Ethernet 1/0.
Router A connects to stub network N1 through Ethernet 1/0, and to Router D
■
and Router E through Serial 2/0 and POS 5/0 respectively.
Router B and Router C connect to stub network N2 through their respective
■
Ethernet 1/0, and to Router E through their respective POS 5/0.
Router E connects to Router A, Router B, Router C and Router D.
■
The range of SSM multicast group addresses is 232.1.1.0/24.
■
IGMPv3 is to run between Router A and N1, and between Router B/Router C
■
and N2.