3Com MSR 50 Series Configuration Manual page 997

To do...
Enter routing policy view
Define match criteria Match IPv4 routes having
for IPv4 routes destinations specified in
the ACL
Match IPv4 routes having
destinations specified in
the IP prefix list
Match IPv4 routes having
next hops or sources
specified in the ACL or IP
prefix list
Match IPv6 routes having the next hop or source
specified in the ACL or IP prefix list
Match routes having AS path attributes specified
in the AS path ACL(s)
Match routes having community attributes in the
specified community list(s)
Match routes having the specified cost
Match BGP routes having extended attributes
contained in the extended community list(s)
Match routes having specified outbound
interface(s)
Match routes having MPLS label
Configuring a Routing Policy
Use the
command... Remarks
route-policy Required
route-policy-name
{ permit | deny }
node node-number
if-match acl Optional
acl-number
Not configured by
default
if-match ip-prefix
ip-prefix-name
if-match ip Optional
{ next-hop |
Not configured by
route-source } { acl
default
acl-number |
ip-prefix
ip-prefix-name }
if-match ipv6 Optional
{ address |
Not configured by
next-hop |
default
route-source } { acl
acl-number |
prefix-list
ipv6-prefix-name }
if-match as-path Optional
as-path-acl-number&
Not configured by
<1-16>
default
if-match Optional
community
Not configured by
{ basic-community-lis
default
t-number
[ whole-match ] |
adv-community-list-n
umber }&<1-16>
if-match cost value Optional
Not configured by
default
if-match Optional
extcommunity
Not configured by
ext-comm-list-numb
default
er&<1-16>
if-match interface Optional
{ interface-type
Not configured by
interface-number }&
default
<1-16>
if-match mpls-label Optional
Not configured by
default
997