3Com MSR 50 Series Configuration Manual page 1307

MD-VPN Configuration Example 1307
[CEa3-Ethernet0/1] igmp enable
[CEa3-Ethernet0/1] pim sm
[CEa3-Ethernet0/1] quit
# Configure an IP address and enable PIM-SM on Ethernet 0/2.
[CEa3] interface ethernet 0/2
[CEa3-Ethernet0/2] ip address 10.110.5.2 24
[CEa3-Ethernet0/2] pim sm
[CEa3-Ethernet0/2] quit
# Configure an IP address and enable PIM-SM on Ethernet 0/3.
[CEa3] interface ethernet 0/3
[CEa3-Ethernet0/3] ip address 10.110.12.2 24
[CEa3-Ethernet0/3] pim sm
[CEa3-Ethernet0/3] quit
# Configure RIP.
[CEa3] rip 2
[CEa3-rip-2] network 10.0.0.0
9 Configure CE b2
# Enable IP multicast routing.
<CEb2> system-view
[CEb2] multicast routing-enable
# Configure an IP address, and enable IGMP and PIM-SM on Ethernet 0/1.
[CEb2] interface ethernet 0/1
[CEb2-Ethernet0/1] ip address 10.110.11.1 24
[CEb2-Ethernet0/1] igmp enable
[CEb2-Ethernet0/1] pim sm
[CEb2-Ethernet0/1] quit
# Configure an IP address and enable PIM-SM on Ethernet 0/2.
[CEb2] interface ethernet 0/2
[CEb2-Ethernet0/2] ip address 10.110.6.2 24
[CEb2-Ethernet0/2] pim sm
[CEb2-Ethernet0/2] quit
# Configure RIP.
[CEb2] rip 3
[CEb2-rip-3] network 10.0.0.0
10 Verify the configuration
To view the share-group information of a VPN instance, use the display
multicast-domain vpn-instance share-group command.
# View the share-group information of VPN instance a on PE 1.