3Com MSR 50 Series Configuration Manual page 768

768 C 51: T A C
HAPTER ERMINAL CCESS ONFIGURATION
[PEB] rta rtc-server listen-port 9000
# Configure the terminal access template.
[PEB] rta template rtcs
# Configure VTY 0 on the RTC server.
[PEB-rta-template-rtcs] vty 0 rtc-server remote 169.254.2.1 2
# Bind the VPN instance to the template.
[PEB-rta-template-rtcs] bind vpn-instance vpna
[PEB-rta-template-rtcs] quit
# Configure interface async1/0.
[PEB] interface async 1/0
[PEB-Async1/0] async mode flow
[PEB-Async1/0] rta terminal rtcs 2
2 Configure the RTC client.
# Configure MPLS L3VPN. For details, see "MPLS L3VPN Configuration" on page
1459.
# Bind Loopback1 to VPNA.
[PEA] interface loopback 1
[PEA-LoopBack1] ip address 169.254.2.1 32
[PEA-LoopBack1] ip binding vpn-instance vpna
[PEA-LoopBack1] quit
# Enable terminal access.
[PEA] rta server enable
# Configure a terminal access template.
[PEA] rta template rtcc
# Configure VTY 0 on the RTC client.
[PEA-rta-template-rtcc] vty 0 rtc-client remote 169.254.3.1 9000
# Bind VPNA to the template.
[PEA-rta-template-rtcc] bind vpn-instance vpna
[PEA-rta-template-rtcc] quit
# Configure interface async1/0.
[PEA] interface async 1/0
[PEB-Async1/0] async mode flow
[PEB-Async1/0] rta terminal rtcc 2
[PEA-Async1/0] quit