3Com MSR 50 Series Configuration Manual page 756

756 C 51: T
HAPTER ERMINAL
A C
CCESS ONFIGURATION
For details about the flow-control software command, refer to the
■
flow-control command in
Follow these steps to perform advanced Telnet initiator configuration:
To do...
Enter system view
Configure the global
source IP address of
TCP connection
Enter terminal
template view
Configure the
automatic link
teardown time
Configure the
automatic link
establishment time
Bind a VPN instance
Enable terminal data
read blocking
Configure the terminal
data send delay
Configure the router
not to clear the
terminal receive buffer
after a TCP connection
is established
Configure the terminal
buffer size
Configure the TCP
connection idle
timeout time
Configure the menu
hotkey
Configure a screen
code for the menu
screen
Configure to print
terminal connection
information on the
terminal
"User Interface Configuration" on page
Use the command...
system-view
rta source-ip ip-address
rta template template-name
auto-close time
auto-link time
bind vpn-instance vpn-name Optional
data read block
data send delay milliseconds Optional
driverbuf save
driverbuf size number
idle-timeout seconds
menu hotkey
ascii-code&<1-3>
menu screencode string
print connection-info
2155.
Remarks
-
Optional
Not configured by default
-
Optional
0 seconds by default; that is, no
automatic link teardown is
performed.
Optional
0 seconds by default; that is, no
automatic link establishment is
performed.
Not configured by default
Optional
Disabled by default
0 milliseconds by default; that is,
there is no send delay.
Optional
By default, the router clears the
terminal receive buffer after a TCP
connection is established.
Optional
8,192 bytes by default
Optional
0 seconds by default; that is, the
connection never times out.
Optional
Not configured by default
Configure menu printing before
configuring the menu hotkey.
Optional
Not configured by default
Optional
By default, terminal connection
information is printed on the
terminal.
Use the print information
command before using this
command