Anycast Rp Configuration Example - 3Com MSR 50 Series Configuration Manual

3com msr 30-16: software guide
Hide thumbs Also See for MSR 50 Series:
Table of Contents

Advertisement

1150
C
70: MSDP C
HAPTER
Anycast RP
Configuration Example
ONFIGURATION
192.168.3.2
192.168.1.1
# View the brief information about MSDP peering relationships on Router F.
[RouterF] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured
Up
1
1
Peer's Address
192.168.3.1
# View the detailed BGP peer information on Router C.
[RouterC] display msdp peer-status
MSDP Peer Information of VPN-Instance: public net
MSDP Peer 192.168.1.2, AS 200
Description:
Information about connection status:
State: Up
Up/down time: 00:15:47
Resets: 0
Connection interface: Pos5/0 (192.168.1.1)
Number of sent/received messages: 16/16
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 00:17:51
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Network requirements
The PIM-SM domain in this example has multiple multicast sources and
receivers. OSPF runs within the domain to provide unicast routes.
It is required that to configure the anycast RP application so that the
receiver-side DRs and the source-side DRs can initiate a Join message to their
respective RPs that are the topologically nearest to them.
On Router B and Router D, configure the interface Loopback 10 as a C-BSR,
and Loopback 20 as a C-RP.
The router ID of Router B is 1.1.1.1, while the router ID of Router D is 2.2.2.2.
Set up an MSDP peering relationship between Router B and Router D.
Up
00:15:32
UP
00:06:39
Listen
Connect
0
0
State
Up/Down time
Up
01:07:08
200
8
0
100
13
0
Shutdown
0
AS
SA Count
Reset Count
200
8
0
Down
0

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents