Enhancements In Igmpv3 - 3Com MSR 50 Series Configuration Manual

3com msr 30-16: software guide
Hide thumbs Also See for MSR 50 Series:
Table of Contents

Advertisement

1118
C
69: IGMP C
HAPTER
Enhancements in
IGMPv3
ONFIGURATION
Built upon and being compatible with IGMPv1 and IGMPv2, IGMPv3 provides
hosts with enhanced control capabilities and provides enhancements of query and
report messages.
Enhancements in control capability of hosts
IGMPv3 has introduced source filtering modes (Include and Exclude), so that a
host not only can join a designated multicast group but also can specify to receive
or reject multicast data from a designated multicast source. When a host joins a
multicast group:
If it needs to receive multicast data from specific sources like S1, S2, ..., it sends
a report with the Filter-Mode denoted as "Include Sources (S1, S2, ......).
If it needs to reject multicast data from specific sources like S1, S2, ..., it sends a
report with the Filter-Mode denoted as "Exclude Sources (S1, S2, ......).
As shown in
Figure
(S1) and Source 2 (S2), both of which can send multicast data to multicast group
G. Host B is interested only in the multicast data that Source 1 sends to G but not
in the data from Source 2.
Figure 331 Flow paths of source-and-group-specific multicast traffic
Source 1
Source 2
Packets (S1,G)
Packets (S2,G)
In the case of IGMPv1 or IGMPv2, Host B cannot select multicast sources when it
joins multicast group G. Therefore, multicast streams from both Source 1 and
Source 2 will flow to Host B whether it needs them or not.
When IGMPv3 is running between the hosts and routers, Host B can explicitly
express its interest in the multicast data Source 1 sends to multicast group G
(denoted as (S1, G)), rather than the multicast data Source 2 sends to multicast
group G (denoted as (S2, G)). Thus, only multicast data from Source 1 will be
delivered to Host B.
Enhancements in query and report capabilities
1 Query message carrying the source addresses
IGMPv3 supports not only general queries (feature of IGMPv1) and group-specific
queries (feature of IGMPv2), but also group-and-source-specific queries.
331, the network comprises two multicast sources, Source 1
Host A
Receiver
Host B
Host C

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents