3Com MSR 50 Series Configuration Manual page 930

930 C 58: OSPF C
HAPTER ONFIGURATION
Figure 280 LSR packet format
0
Version
Major fields:
LS type: The type number of the LSA to be requested, type 1 for example
■
indicates the Router LSA
Link State ID: Determined by LSA type
■
Advertising Router: The ID of the router that sent the LSA
■
LSU packet
LSU (Link State Update) packets are used to send the requested LSAs to peers, and
each packet carries a collection of LSAs. The LSU packet format is shown below.
Figure 281 LSU packet format
0
Version
LSAck packet
LSAack (Link State Acknowledgment) packets are used to acknowledge received
LSU packets, contents including LSA headers to describe the corresponding LSAs.
Multiple LSAs can be acknowledged in a single Link State Acknowledgment
packet. The following figure gives its format.
7 15
3
Router ID
Area ID
Checksum
Authentication
Authentication
LS type
Link state ID
Advertising router
7 15
4
Router ID
Area ID
Checksum
Authentication
Authentication
Number of LSAs
LSA
LSA
Packet length
AuType
...
Packet length
AuType
31
31