3Com MSR 50 Series Configuration Manual page 784

784 C 52: FEP I
HAPTER NSTALLATION AND
C
ONFIGURATION
Displaying system resource information
In the main interface, select option 3 to enter the system resource submenu. Then,
you can display system resource information by selecting an option in the
following. The screen displays:
*****************************
ttyd Administration Program
******************************
Display system resources
1 - Display CPU resources.
2 - Display memory resources.
3 - Display stream resources.
0 - Return to the main menu.
Enter:
1 Display CPU resources.
From the system resource submenu, select option 1 to display the CPU resources in
the system. This operation is the same as executing the sar -u 1 5 command. The
following displays:
SCO_SV sco2 3.2v5.0.5 i80386
14:33:16 %usr
14:33:17 0
14:33:18 0
14:33:19 0
14:33:20 0
14:33:21 0
Average 0
Press <Enter> to return.
2 Display memory resources.
From the system resource submenu, select option 2 to display the memory
resources in the system. This operation is the same as executing the sar -r 1 5
command. The following displays:
SCO_SV sco2 3.2v5.0.5 i80386
15:03:24 freemem
15:03:25 23683
15:03:26 23683
15:03:27 23683
15:03:28 23683
15:03:29 23683
Average 23683
Press <Enter> to return.
3 Display stream resources.
From the system resource submenu, select 3 to display the stream resources in the
system. The following displays:
07/15/2002
%sys %wio %idle (-u)
0 0 100
0 0 100
0 0 100
0 0 100
0 0 100
0 0 100
07/15/2002
freeswp availrmem availsmem (-r)
390000 28329
390000 28329
390000 28329
390000 28329
390000 28329
390000 28329
71244
71244
71244
71244
71244
71244