3Com MSR 50 Series Configuration Manual page 1061

[RouterC] interface serial 2/0
[RouterC-Serial2/0] ospfv3 1 area 0
[RouterC-Serial2/0] quit
[RouterC] interface serial 2/1
[RouterC-Serial2/1] ospfv3 1 area 2
[RouterC-Serial2/1] quit
# Configure Router D
<RouterD> system-view
[RouterD] ipv6
[RouterD] ospfv3 1
[RouterD-ospfv3-1] router-id 4.4.4.4
[RouterD-ospfv3-1] quit
[RouterD] interface serial 2/1
[RouterD-Serial2/1] ospfv3 1 area 2
[RouterD-Serial2/1] quit
# Display OSPFv3 neighbor information on Router B.
[RouterB] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State
3.3.3.3 1 Full/Backup
OSPFv3 Area ID 0.0.0.1 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State
1.1.1.1 1 Full/DR
# Display OSPFv3 neighbor information on Router C.
[RouterC] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State
2.2.2.2 1 Full/DR
OSPFv3 Area ID 0.0.0.2 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State
4.4.4.4 1 Full/Backup
# Display OSPFv3 routing table information on Router D.
[RouterD] display ospfv3 routing
E1 - Type 1 external route,
E2 - Type 2 external route,
OSPFv3 Router with ID (4.4.4.4) (Process 1)
------------------------------------------------------------------------
*Destination: 2001::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
*Destination: 2001:1::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
OSPFv3 Configuration Examples
Dead Time Interface
00:00:34 S2/0
Dead Time Interface
00:00:35 S2/1
Dead Time Interface
00:00:35 S2/0
Dead Time Interface
00:00:36 S2/1
IA - Inter area route,
* - Selected route
1061
Instance ID
0
Instance ID
0
Instance ID
0
Instance ID
0
I - Intra area route
Cost : 2
Interface: S2/1
Cost : 3
Interface: S2/1