Resetting Ipv6 Bgp Connections; Clearing Ipv6 Bgp Information; Ipv6 Bgp Configuration Examples; Ipv6 Bgp Basic Configuration - 3Com MSR 50 Series Configuration Manual

1034 C 62: IP 6 BGP C
HAPTER V
Resetting IPv6 BGP
Connections
Clearing IPv6 BGP
Information
IPv6 BGP
Configuration
Examples
IPv6 BGP Basic
Configuration
ONFIGURATION
To do...
Perform soft reset on
IPv6 BGP connections
Reset IPv6 BGP
connections
To do...
Clear dampening routing
information and release
suppressed routes
Clear route flap information
n
Some IPv6 BGP configuration examples are similar to those of BGP, so refer to
"BGP Configuration" on page 825
Network requirements
In Figure 304 are all IPv6 BGP routers. Between Router A and Router B is an EBGP
connection. Router B, Router C and Router D are IBGP fully meshed.
Network diagram
Figure 304 Network diagram for IPv6 BGP basic configuration
Router A
S2 /1
10::1/64
AS 65008
Configuration procedure
1 Configure IPv6 addresses for interfaces (omitted)
2 Configure IBGP connections
# Configure Router B.
Use the command...
refresh bgp ipv6 { ipv4-address | ipv6-address | all |
external | group ipv6-group-name | internal }
{ export | import }
reset bgp ipv6 { as-number | ipv4-address |
ipv6-address [ flap-info ] | all | group group-name |
external | internal }
Use the command...
reset bgp ipv6 dampening [ ipv6-address
prefix-length ]
reset bgp ipv6 flap-info
[ ipv6-address/prefix-length | regexp
as-path-regexp | as-path-acl
as-path-acl-number ]
for related information.
S2/2
9:3::2/64
Router C
S2/1
10::2/64
S2 /2
9:3::1 /64
S2 /0
9:1::1/64
Router B
AS 65009
S2/1
9:2::1/64
S2 /1
9:2::2 /64
S2/0
9:1::2/64
Router D
Remarks
Available in
user view
Remarks
Available in
user view