3Com MSR 50 Series Configuration Manual page 912

912 C 57: IS-IS C
HAPTER ONFIGURATION
n
[RouterC] display isis interface
Interface: Ethernet1/0
Id IPV4.State
001 Up
# Display information about IS-IS interfaces of Router D.
[RouterD] display isis interface
Interface: Ethernet1/0
Id IPV4.State
001 Up
By using the default DIS priority, Router C is the Level-1 DIS, and Router D is the
Level-2 DIS. The pseudonodes of Level-1 and Level-2 are 0000.0000.0003.01 and
0000.0000.0004.01 respectively.
3 Configure the DIS priority of Router A.
[RouterA] interface ethernet 1/0
[RouterA-Ethernet1/0] isis dis-priority 100
# Display information about IS-IS neighbors of Router A.
[RouterA] display isis peer
System Id: 0000.0000.0002
Interface: Ethernet1/0
State: Up HoldTime: 29s
System Id: 0000.0000.0003
Interface: Ethernet1/0
State: Up HoldTime: 22s
System Id: 0000.0000.0002
Interface: Ethernet1/0
State: Up HoldTime: 22s
System Id: 0000.0000.0004
Interface: Ethernet1/0
State: Up HoldTime: 22s
# Display information about IS-IS interfaces of Router A.
[RouterA] display isis interface
Interface: Ethernet1/0
Interface information for ISIS(1)
---------------------------------
IPV6.State MTU
Down 1497
Interface information for ISIS(1)
---------------------------------
IPV6.State MTU
Down 1497
Peer information for ISIS(1)
----------------------------
Circuit Id: 0000.0000.0001.01
Type: L1(L1L2)
Circuit Id: 0000.0000.0001.01
Type: L1
Circuit Id: 0000.0000.0001.01
Type: L2(L1L2)
Circuit Id: 0000.0000.0001.01
Type: L2
Interface information for ISIS(1)
---------------------------------
Type DIS
L1/L2 Yes/No
Type DIS
L1/L2 No/Yes
PRI: 64
PRI: 64
PRI: 64
PRI: 64