Source[<N>]]:Apply:noise - Rigol DG800 Pro Series Programming Manual

Parameter
Name
<n>
<lim_set>
<frequency>
<amplitude>
<offset>
<phase>
Remarks
• <frequency>, <phase>, and <amplitude> are not applicable to DC. However, a
placeholder must be specified for them.
• The range of <offset> is limited by the "Impedance" setting
:OUTPut[<n>]:LOAD
(
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
None.
Examples
:SOURce1:APPLy:DC 100,5,1,90 /*Sets CH1 to output a DC with 1 Vdc
offset.*/
3.11.2.4 [:SOURce[<n>]]:APPLy:NOISe
Syntax
[:SOURce[<
offset >|< lim_set >}[,{< phase >|< lim_set >}]]]]
{<
Description
Sets the specified channel to output noise with the specified amplitude and offset.
Parameter
Name
<n>
<lim_set>
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Type Range
Discrete {1|2}
Discrete {DEFault|MINimum|MAXimum}
Real Refer to
Real Refer to
Real Refer to
Real Refer to
).
n >]]:APPLy:NOISe [{< frequency >|< lim_set >}[,{< amplitude >|< lim_set >}[,
Type Range
Discrete {1|2}
Discrete {DEFault|MINimum|MAXimum}
Remarks
Remarks
Remarks
Remarks
DG800 Pro/DG900 Pro Programming
Command System
Default
1
-
-
-
0 Vdc
-
Default
1
-
Guide
71