Source[<N>]]:Pm:source; Source[<N>]]:Pm:state - Rigol DG800 Pro Series Programming Manual

Command System
3.11.13.4 [:SOURce[<n>]]:PM:SOURce
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the PM modulation source for the specified channel.
Parameter
Name
<n>
<source>
Remarks
• The instrument can receive modulating waveforms from internal or external
modulation source.
-
-
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns INT or EXT.
Examples
:SOURce1:PM:SOURce INTernal/*Sets the PM modulation source to
internal modulation source for CH1.*/
:SOURce1:PM:SOURce? /*Queries the PM modulation source for CH1.
The query returns INT.*/
3.11.13.5 [:SOURce[<n>]]:PM:STATe
Syntax
[:SOURce[<
[:SOURce[<
DG800 Pro/DG900 Pro Programming
Guide
134
n >]]:PM:SOURce < source >
n >]]:PM:SOURce?
Type
Discrete
Discrete
INTernal: internal modulation source. When the internal modulation
source is selected, you can use
select the modulating waveforms.
EXTernal: external modulation source. When the external modulation
source is selected, the generator receives the external modulating signal
from the rear-panel [AUX IN/OUT] connector.
n >]]:PM:STATe < bool >
n >]]:PM:STATe?
Range
{1|2}
{INTernal|EXTernal}
[:SOURce[<n>]]:PM:INTernal:FUNCtion
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
INTernal
to