Document Overview - Rigol DG800 Pro Series Programming Manual

1

Document Overview

This manual introduces how to program and control DG800 Pro and DG900 Pro series
function/arbitrary waveform generator via the remote interface by using the SCPI
(Standard Commands for Programmable Instruments) commands. DG800 Pro and
DG900 Pro series can communicate with PC through USB or LAN interface.
TIP
For the latest version of this manual, download it from RIGOL official website (
Publication Number
PGB16100-1110
Software Version
00.01.00
Software upgrade might change or add product features. Please acquire the latest
version of the manual from RIGOL website or contact RIGOL to upgrade the software.
Format Conventions in this Manual
1. Key
The front panel key is denoted by the menu key icon. For example,
indicates the "Default" key.
2. Menu
The menu item is denoted by the format of "Menu Name (Bold) + Character
Shading" in the manual. For example, Setup.
3. Operation Procedures
The next step of the operation is denoted by ">" in the manual. For example,
> Utility indicates first clicking or tapping
Content Conventions in this Manual
DG800 Pro series function/arbitrary waveform generator includes the following
models. Unless otherwise specified, this manual takes the two-channel model DG852
Pro as an example to illustrate the functions and operation methods of DG800 Pro
series.
Model
DG821 Pro
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
No. of Channels Sample Rate
1 625 MSa/s
Document Overview
www.rigol.com
and then clicking or tapping Utility.
Max. Output
Frequency
25 MHz
DG800 Pro/DG900 Pro Programming
).
Guide
1