Source[<N>]]:Pskey:state; Source[<N>]]:Pwm - Rigol DG800 Pro Series Programming Manual

3.11.14.5 [:SOURce[<n>]]:PSKey:STATe
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the on/off status of the PSK modulation function for the specified
channel.
Parameter
Name
<n>
<bool>
Remarks
• If the Sweep (
[:SOURce[<n>]]:BURSt:STATe
(
[:SOURce[<n>]]:FUNCtion:SEQuence[:STATe]
(
will be disabled automatically when the modulation function is enabled.
• The harmonic, noise, DC, and pulse cannot be modulated for PSK.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns 0 or 1.
Examples
:SOURce1:PSKey:STATe ON /*Enables the PSK modulation function for
CH1.*/
:SOURce1:PSKey:STATe? /*Queries the on/off status of the PSK
modulation function for CH1. The query returns 1.*/
3.11.15 [:SOURce[<n>]]:PWM
[:SOURce[<n>]]:PWM commands are used to set and query the PWM parameters
such as the duty cycle deviation, width deviation, modulating waveform frequency,
modulation source, modulating waveform, and the on/off status of the PWM
modulation.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:PSKey:STATe < bool >
n >]]:PSKey:STATe?
Type Range
Discrete {1|2}
Bool {0|1|OFF|ON}
[:SOURce[<n>]]:SWEep:STATe
), or Sequence
Command System
Default
1
0|OFF
), Burst
) function is currently enabled, it
DG800 Pro/DG900 Pro Programming
Guide
139