Source[<N>]]:Apply:dc - Rigol DG800 Pro Series Programming Manual

Command System
Description
Sets the specified channel to output an arbitrary waveform with the specified
frequency, amplitude, offset, and phase.
Parameter
Name
<n>
<lim_set>
<frequency>
<amplitude>
<offset>
<phase>
Remarks
• The range of <frequency> is related to the instrument model (
of Continuous Waveform Frequency
Table 3.62 Range of Amplitude
amplitude setting.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
None.
Examples
:SOURce1:APPLy:ARBitrary 100,1,2,1 /*Sets CH1 to output an
arbitrary waveform with 100 Hz frequency, 1 Vpp amplitude, 2 Vdc
offset, and 1° start phase.*/
3.11.2.3 [:SOURce[<n>]]:APPLy:DC
Syntax
[:SOURce[<
offset >|< lim_set >}[,{< phase >|< lim_set >}]]]]
{<
Description
Sets the specified channel to output a DC with a specified offset.
DG800 Pro/DG900 Pro Programming
Guide
70
Type Range
Discrete {1|2}
Discrete {DEFault|MINimum|MAXimum}
Real Refer to
Real Refer to
Real Refer to
Real -360° to 360°
n >]]:APPLy:DC [{< frequency >|< lim_set >}[,{< amplitude >|< lim_set >}[,
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Remarks
Remarks
Remarks
). For the range of <amplitude>, refer to
. The range of <offset> is limited by the current
Default
1
-
1 kHz
5 Vpp
0 Vdc
0°
Table 3.60 Range