Source[<N>]]:Function:square:period - Rigol DG800 Pro Series Programming Manual

Examples
:SOURce1:FUNCtion:SQUare:DCYCle 45 /*Sets the square duty cycle to
45% for CH1.*/
:SOURce1:FUNCtion:SQUare:DCYCle? /*Queries the square duty cycle
for CH1. The query returns +4.500000000000000E+01.*/
3.11.8.18 [:SOURce[<n>]]:FUNCtion:SQUare:PERiod
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the square period for the specified channel.
Parameter
Name
<n>
<seconds>
<lim_set>
<lim_query>
Remarks
• When the wave type of the specified channel is changed, the instrument still
uses the period if the period is valid. Otherwise, the instrument automatically
sets the period as the lower limit for the new wave type.
• For the square period setting range, refer to
Waveform Period
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the square period in scientific notation. For example, the query
might return +1.000000000000000E+00, indicating that the square period is 1 s.
Examples
:SOURce1:FUNCtion:SQUare:PERiod 1 /*Sets the square period to 1 s
for CH1.*/
:SOURce1:FUNCtion:SQUare:PERiod? /*Queries the square period for
CH1. The query returns +1.000000000000000E+00.*/
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:FUNCtion:SQUare:PERiod {< seconds >|< lim_set >}
n >]]:FUNCtion:SQUare:PERiod? [< lim_query >]
Type Range
Discrete {1|2}
Real Refer to
Discrete {MINimum|MAXimum|DEFault}
Discrete {MINimum|MAXimum}
.
Remarks
Table 3.61 Range of Continuous
DG800 Pro/DG900 Pro Programming
Command System
Default
1
1 ms
-
-
Guide
117