Table of Contents
Advertisement
Return Format
The query returns a string between X0000000000000000000 and
X1111111111111111111. For example, the query might return
X0010001000000000000.
Examples
:SOURce1:HARMonic:COMBine X0010001000000000000 /*Sets CH1 to
output the fundamental waveform, the 4th order of harmonic, and
8th order of harmonic.*/
:SOURce1:HARMonic:COMBine? /*Queries the harmonic output for CH1.
The query returns X0010001000000000000.*/
3.11.9.2
[:SOURce[<n>]]:HARMonic:COMBine:AMPLitude
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the amplitude of the specified order of combine harmonic for the
specified channel.
Parameter
Name
<n>
<sn>
<amplitude>
<lim_set>
<all>
<lim_query>
Remarks
•
The amplitude upper limit of the specified channel is limited by the impedance
setting (
•
You can use <all> to query the amplitudes of all orders of the harmonic.
•
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:HARMonic:COMBine:AMPLitude < sn >,{< amplitude >|< lim_set >}
n >]]:HARMonic:COMBine:AMPLitude? {< sn >|< all >}[,< lim_query >]
Type
Range
Discrete
{1|2}
Integer
2 to 20
2 mVpp (HighZ) to the amplitude
Real
upper limit of the specified channel
Discrete
{MINimum|MAXimum|DEFault}
Discrete
{ALL}
Discrete
{MINimum|MAXimum}
:OUTPut[<n>]:LOAD
) and frequency/period setting.
Command System
Default
1
2
5 Vpp
-
-
-
DG800 Pro/DG900 Pro Programming
Guide
119
Advertisement
Table of Contents
