Source[<N>]]:Am:state; Source[<N>]]:Apply - Rigol DG800 Pro Series Programming Manual

Command System
Return Format
The query returns INT or EXT.
Examples
:SOURce1:AM:SOURce INTernal /*Sets the AM modulation source to
internal modulation source for CH1.*/
:SOURce1:AM:SOURce? /*Queries the AM modulation source for CH1.
The query returns INT.*/
3.11.1.6 [:SOURce[<n>]]:AM:STATe
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the on/off status of the AM modulation function for the specified
channel.
Parameter
Name
<n>
<bool>
Remarks
• If the Sweep (
[:SOURce[<n>]]:BURSt:STATe
(
( [:SOURce[<n>]]:FUNCtion:SEQuence[:STATe]
will be disabled automatically when the modulation function is enabled.
• The harmonic, noise, DC, and pulse cannot be modulated for AM.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns 0 or 1.
Examples
:SOURce1:AM:STATe ON /*Enables the AM modulation function for
CH1.*/
:SOURce1:AM:STATe? /*Queries the on/off status of the AM
modulation function for CH1. The query returns 1.*/
3.11.2 [:SOURce[<n>]]:APPLy
DG800 Pro/DG900 Pro Programming
Guide
68
n >]]:AM:STATe < bool >
n >]]:AM:STATe?
Type Range
Discrete {1|2}
Bool {0|1|OFF|ON}
[:SOURce[<n>]]:SWEep:STATe
), or Sequence
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
OFF
), Burst
) function is currently enabled, it