Source[<N>]]:Apply:pulse - Rigol DG800 Pro Series Programming Manual

Command System
Name
<frequency>
<amplitude>
<offset>
<phase>
Remarks
• <frequency> and <phase>are not applicable to noise. However, a placeholder
must be specified for them.
• For the range of <amplitude>, refer to
range of <offset> is limited by the current amplitude setting.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
None.
Examples
:SOURce1:APPLy:NOISe 100,2,1,90 /*Sets CH1 to output noise with 2
Vpp amplitude and 1 Vdc offset.*/
3.11.2.5 [:SOURce[<n>]]:APPLy:PULSe
Syntax
[:SOURce[<
{< offset >|< lim_set >}[,{< phase >|< lim_set >}]]]]
Description
Sets the specified channel to output a pulse with the specified frequency, amplitude,
offset, and phase.
Parameter
Name
<n>
<lim_set>
<frequency>
<amplitude>
DG800 Pro/DG900 Pro Programming
Guide
72
Type Range
Real Refer to
Real Refer to
Real Refer to
Real Refer to
n >]]:APPLy:PULSe [{< frequency >|< lim_set >}[,{< amplitude >|< lim_set >}[,
Type Range
Discrete {1|2}
Discrete {DEFault|MINimum|MAXimum}
Real Refer to
Real Refer to
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Remarks
Remarks
Remarks
Remarks
Table 3.62 Range of Amplitude
Remarks
Remarks
Default
-
5 Vpp
0 Vdc
-
. The
Default
1
-
1 kHz
5 Vpp