Source[<N>]]:Voltage:couple:ratio; Source[<N>]]:Voltage:couple[:State] - Rigol DG800 Pro Series Programming Manual

3.11.20.4 [:SOURce[<n>]]:VOLTage:COUPle:RATio
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the amplitude ratio of the amplitude coupling for the specified
channel.
Parameter
Name
<n>
<ratio>
Remarks
• When modifying the ratio, if base channel parameters exceed the limits of the
coupled channel after coupling calculation, the generator will automatically
adjust the waveform amplitude to avoid parameter overlimit.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the amplitude ratio in scientific notation. For example, the query
might return +2.000000000000000E+00, indicating that the ratio is 2.
Examples
:SOURce1:VOLTage:COUPle:RATio 2 /*Sets the amplitude ratio of the
amplitude coupling to 2 for CH1.*/
:SOURce1:VOLTage:COUPle:RATio? /*Queries the amplitude ratio of
the amplitude coupling for CH1. The query returns
+2.000000000000000E+00.*/
3.11.20.5 [:SOURce[<n>]]:VOLTage:COUPle[:STATe]
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the on/off status of the amplitude coupling function for the specified
channel.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:VOLTage:COUPle:RATio < ratio >
n >]]:VOLTage:COUPle:RATio?
Type Range
Discrete {1|2}
Real 0.001 to 1000
n >]]:VOLTage:COUPle[:STATe] < bool >
n >]]:VOLTage:COUPle[:STATe]?
Command System
Default
1
1
DG800 Pro/DG900 Pro Programming
Guide
161