Source[<N>]]:Burst:ncycles - Rigol DG800 Pro Series Programming Manual

-
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns TRIG or GAT.
Examples
:SOURce1:BURSt:MODE GATed /*Sets the burst type to Gated for CH1.*/
:SOURce1:BURSt:MODE? /*Queries the burst type for CH1. The query
returns GAT.*/
3.11.4.4 [:SOURce[<n>]]:BURSt:NCYCles
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the number of cycles (burst count) of the N-Cycle bursts for the
specified channel.
Parameter
Name
<n>
<cycles>
<lim_set>
<lim_query>
Remarks
• In N-Cycle Burst mode (
waveform for a specified number of cycles (burst count) each time trigger
signal is received. You can also set the burst count to "Infinity".
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the burst count in scientific notation. For example, the query
might return +5.000000000000000E+02, indicating that the burst count is 500.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
GATed: Gated burst. The generator controls the waveform output based
on the external signal levels at the rear-panel [AUX IN/OUT] connector.
[:SOURce[<n>]]:BURSt:GATE:POLarity
You can use
polarity.
n >]]:BURSt:NCYCles {< cycles >|< lim_set >}
n >]]:BURSt:NCYCles? [< lim_query >]
Type
Discrete
Integer
Discrete
Discrete
[:SOURce[<n>]]:BURSt:MODE
Range
{1|2}
1 to 1,000,000
{INFinity|MINimum|MAXimum}
{MINimum|MAXimum}
DG800 Pro/DG900 Pro Programming
Command System
to select the signal's
Default
1
1
-
-
), the instrument outputs a
Guide
83