Source[<N>]]:Am:dssc; Source[<N>]]:Am:internal:frequency - Rigol DG800 Pro Series Programming Manual

3.11.1.2 [:SOURce[<n>]]:AM:DSSC
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the on/off status of the AM DSSC function for the specified channel.
Parameter
Name
<n>
<state>
Remarks
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns 0 or 1.
Examples
:SOURce1:AM:DSSC ON /*Enables the AM DSSC function for CH1.*/
:SOURce1:AM:DSSC? /*Queries the on/off status of the AM DSSC
function for CH1. The query returns 1.*/
3.11.1.3 [:SOURce[<n>]]:AM:INTernal:FREQuency
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the frequency of the AM modulating waveform for the specified
channel.
Parameter
Name
<n>
<frequency>
<lim_set>
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:AM:DSSC < state >
n >]]:AM:DSSC?
Type Range
Discrete {1|2}
Discrete {ON|1|OFF|0}
n >]]:AM:INTernal:FREQuency {< frequency >|< lim_set >}
n >]]:AM:INTernal:FREQuency? [< lim_query >]
Type Range
Discrete {1|2}
Real 2 mHz to 1 MHz
Discrete {MINimum|MAXimum|DEFault}
Command System
Default
1
0|OFF
Default
1
100 Hz
-
DG800 Pro/DG900 Pro Programming
Guide
65