Source[<N>]]:Askey:internal:rate - Rigol DG800 Pro Series Programming Manual

• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the ASK modulation amplitude in scientific notation. For example,
the query might return +1.000000000000000E+00, indicating that the modulation
amplitude is 1 Vpp.
Examples
:SOURce1:ASKey:AMPLitude 1 /*Sets the ASK modulation amplitude to
1 Vpp for CH1.*/
:SOURce1:ASKey:AMPLitude? /*Queries the ASK modulation amplitude
for CH1. The query returns +1.000000000000000E+00.*/
3.11.3.2 [:SOURce[<n>]]:ASKey:INTernal:RATE
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the ASK modulation rate for the specified channel.
Parameter
Name
<n>
<rate>
<lim>
Remarks
• This command is only available for internal modulation source
[:SOURce[<n>]]:ASKey:SOURce
(
• ASK rate is the rate at which the output amplitude "shifts" between the carrier
amplitude (
[:SOURce[<n>]]:ASKey:AMPLitude
(
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the ASK rate in scientific notation. For example, the query might
return +1.500000000000000E+02, indicating that the ASK rate is 150 Hz.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:ASKey:INTernal:RATE {< rate >|< lim >}
n >]]:ASKey:INTernal:RATE? [< lim >]
Type Range
Discrete {1|2}
Real 2 mHz to 1 MHz
Discrete {MINimum|MAXimum}
[:SOURce[<n>]]:VOLTage
).
) and modulation amplitude
).
DG800 Pro/DG900 Pro Programming
Command System
Default
1
100 Hz
-
Guide
77