Source[<N>]]:Fskey:internal:rate - Rigol DG800 Pro Series Programming Manual

[:SOURce[<
Description
Sets or queries the FSK hop frequency for the specified channel.
Parameter
Name
<n>
<frequency>
<lim_set>
<lim_query>
Remarks
• In FSK modulation, the generator "shift" its output frequency between the
carrier frequency (
• The range of the hop frequency <frequency> is consistent with the range of the
carrier frequency.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the hop frequency in scientific notation. For example, the query
might return +5.000000000000000E+03, indicating that the frequency is 5 kHz.
Examples
:SOURce1:FSKey:FREQuency 5000 /*Sets the FSK hop frequency to 5
kHz for CH1.*/
:SOURce1:FSKey:FREQuency? /*Queries the FSK hop frequency for CH1.
The query returns +5.000000000000000E+03.*/
3.11.7.2 [:SOURce[<n>]]:FSKey:INTernal:RATE
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the FSK modulation rate for the specified channel.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:FSKey:FREQuency? [< lim_query >]
Type Range
Discrete {1|2}
Real Refer to
Discrete {MINimum|MAXimum|DEFault}
Discrete {MINimum|MAXimum}
[:SOURce[<n>]]:FREQuency
n >]]:FSKey:INTernal:RATE {< rate >|< lim >}
n >]]:FSKey:INTernal:RATE? [< lim >]
Remarks
) and hop frequency.
DG800 Pro/DG900 Pro Programming
Command System
Default
1
10 kHz
-
-
Guide
99