Source[<N>]]:Pskey:phase - Rigol DG800 Pro Series Programming Manual

Command System
Parameter
Name
<n>
<rate>
<lim>
Remarks
• This command is only available for internal modulation source
[:SOURce[<n>]]:PSKey:SOURce
(
"shifts" between the carrier phase (
phase (
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the PSK rate in scientific notation. For example, the query might
return +1.500000000000000E+02, indicating that the PSK rate is 150 Hz.
Examples
:SOURce1:PSKey:INTernal:RATE 150 /*Sets the PSK rate to 150 Hz for
CH1.*/
:SOURce1:PSKey:INTernal:RATE? /*Queries the PSK rate for CH1. The
query returns +1.500000000000000E+02.*/
3.11.14.2 [:SOURce[<n>]]:PSKey:PHASe
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the PSK modulation phase for the specified channel.
Parameter
Name
<n>
<phase>
<lim_set>
<lim_query>
DG800 Pro/DG900 Pro Programming
Guide
136
Type Range
Discrete {1|2}
Real 2 mHz to 1 MHz
Discrete {MINimum|MAXimum}
[:SOURce[<n>]]:PSKey:PHASe
n >]]:PSKey:PHASe {< phase >|< lim_set >}
n >]]:PSKey:PHASe? [< lim_query >]
Type Range
Discrete {1|2}
Real 0° to 360°
Discrete {MINimum|MAXimum|DEFault}
Discrete {MINimum|MAXimum}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
). PSK rate is the rate at which the output phase
[:SOURce[<n>]]:PHASe
).
Default
1
100 Hz
-
) and modulation
Default
1
180°
-
-