Rcl - Rigol DG800 Pro Series Programming Manual

Command System
Parameter
Name
<bool>
Remarks
• *PSC 1 denotes clearing the enable registers of the Status Byte and Standard
Event registers at power-on; *PSC 0 denotes that the enable registers of the
Status Byte and Standard Event registers will not be affected at power-on.
• You can also send
Status Byte and Standard Event registers respectively.
Return Format
The query returns 0 or 1.
Examples
*PSC 1 /*Enables the function of clearing the enable registers of
the Status Byte and Standard Event registers at power-on.*/
*PSC? /*Queries the on/off state of the function of clearing the
registers at power-on. The query returns 1.*/
3.5.8

*RCL

Syntax
value >
*RCL <
Description
Recalls a previously stored instrument state from the specified non-volatile memory
location.
Parameter
Name
<value>
Remarks
None.
Return Format
None.
Examples
*RCL 1 /*Recalls the instrument state stored in memory location 1.*/
DG800 Pro/DG900 Pro Programming
Guide
30
Type Range
Bool {0|1}
*SRE
(*SRE 0) or (*ESE 0) to clear the enable registers of the
Type Range
Discrete {0|1|2|3|4|5}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
0
Default
0