Output[<N>]:Sync - Rigol DG800 Pro Series Programming Manual

Description
Sets or queries the output on/off status for the specified channel.
Parameter
Name
<n>
<state>
Remarks
• 0/OFF disables the channel output; 1/ON enables the channel output.
• The parameter [<n>] is used to specify the channel. If [<n>] is omitted, it is
interpreted as CH1.
Return Format
The query returns 0 or 1.
Examples
:OUTPut1:STATe 1 /*Enables the output of CH1.*/
:OUTPut1:STATe? /*Queries the output on/off status for CH1. The
query returns 1.*/
3.10.5 :OUTPut[<n>]:SYNC
Syntax
:OUTPut[<
:OUTPut[<
Description
Sets or queries the output state of the sync signal.
Parameter
Name
<n>
<state>
Remarks
• Sine, Square, Ramp, Pulse, Arb (except DC), Sweep waveforms, Bursts, and
modulated waveforms have associated sync signals. For the characteristics of
sync signals for different signals, refer to the user manual of this product.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Type
Discrete
Bool
n >]:SYNC < state >
n >]:SYNC?
Type
Discrete
Bool
Range
{1|2}
{0|1|OFF|ON}
Range
{1|2}
{0|1|OFF|ON}
DG800 Pro/DG900 Pro Programming
Command System
Default
1
0|OFF
Default
1
0|OFF
Guide
57