Source[<N>]]:Voltage:low - Rigol DG800 Pro Series Programming Manual

Parameter
Name
<n>
<voltage>
<lim_set>
<lim_query>
Remarks
• Define the amplitude upper/lower limit to Vpp
high level should conform to the following restrictions:
|High Level| ≤ Vpp
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the high level in scientific notation. For example, the query might
return +2.000000000000000E+00, indicating that the high level is 2 V.
Examples
:SOURce1:VOLTage:HIGH 2 /*Sets the high level to 2 V for CH1.*/
:SOURce1:VOLTage:HIGH? /*Queries the high level for CH1. The query
returns +2.000000000000000E+00.*/
3.11.20.7 [:SOURce[<n>]]:VOLTage:LOW
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the low level for the specified channel.
Parameter
Name
<n>
<voltage>
<lim_set>
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Type Range
Discrete {1|2}
Real Refer to
Discrete {MINimum|MAXimum|DEFault}
Discrete {MINimum|MAXimum}
/2, and Vpp
max
n >]]:VOLTage:LOW {< voltage >|< lim_set >}
n >]]:VOLTage:LOW? [< lim_query >]
Type Range
Discrete {1|2}
Real Refer to
Discrete {MINimum|MAXimum|DEFault}
Remarks
/Vpp
max min
≤ (High Level - Low Level) ≤ Vpp
min
Remarks
DG800 Pro/DG900 Pro Programming
Command System
Default
1
2.5 V
-
-
. The range of the
max
Default
1
-2.5 V
-
Guide
163