System Commands; System:beeper[:Immediate]; System:beeper:state - Rigol DG800 Pro Series Programming Manual

Command System
3.12

:SYSTem Commands

:SYSTem commands are used to set or query system parameters.
3.12.1

:SYSTem:BEEPer[:IMMediate]

Syntax
:SYSTem:BEEPer[:IMMediate]
Description
Issues a single beep immediately.
Parameter
None.
Remarks
This command is valid regardless of the beeper on/off state. This command issues a
beep immediately even though the beeper is turned off.
Return Format
None.
Examples
:SYSTem:BEEPer:IMMediate /*Issues a single beep immediately.*/
3.12.2

:SYSTem:BEEPer:STATe

Syntax
:SYSTem:BEEPer:STATe <
:SYSTem:BEEPer:STATe?
Description
Sets or queries the on/off status of the beeper.
Parameter
Name
<state>
Remarks
None.
DG800 Pro/DG900 Pro Programming
Guide
166
state >
Type Range
Bool {1|ON|0|OFF}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1|ON